MA lighting grandMA, Operating Manual

Page: 163 / 232

Hotline: +49 5251 688865-99 Hotline: +49 5251 688865-99 Hotline: +49 5251 688865-99 Hotline: +49 5251 688865-99 Hotline: +49 5251 688865-99
. Operating Manual grandMA Version 5.4
163 163
163 163 163
FILTERED EXTRACTION TO THE PROGRAMMER
All values that exist in the source for the destination devices will be copied if
they pass the filter !
Examples:
FIXTURE THRU AT (select PAN/TILT) CUE 1 ENTER.
This will bring all PAN/TILT information contained in CUE 1 of the default executor
active into the programmer.
CUE 5 AT (select GOBO) CUE 4 ENTER.
Devices of cue 5 get the gobos of cue 4 (of course only if the gobos were programmed
into
cue 4).
CUE 5 AT (select GOBO) CUE THRU 4 ENTER
Devices of cue 5 get the gobos of the STATUS of the STATUS
of the STATUS of the STATUS
of the STATUS of cue 4 ! This is very different to
the
previous example !!!
b) As helping keyword As helping keyword
As helping keyword As helping keyword
As helping keyword : See COPY MOVE and INSERT.
2x AT 2x AT
2x AT 2x AT
2x AT
Will set the defaul value for selected fixtures (set in SETUP / DEFAULTS/ DEFAULT AT)
CHANNEL CHANNEL
CHANNEL CHANNEL CHANNEL
Classification Classification
Classification Classification
Classification : object keyword
a) as starting keyword as starting keyword
as starting keyword as starting keyword
as starting keyword :
CHANNEL ENTER
CHANNEL becomes the DEFAULT KEYWORD.
CHANNEL (range list) ENTER
Select channels in range list.
CHANNEL (range list) AT … (see AT)
Apply values to channels in range list.
Channel numbers in the range list must be in the interval [ 1 … 9999].
b) as target for the following executing commands as target for the following executing commands
as target for the following executing commands as target for the following executing commands
as target for the following executing commands :
ON activate dimmer value in programmer.
OFF deactivate dimmer value in programmer and deselect
channel.
PAUSE PARK dimmer value of channel.
GO UNPARK dimmer value of channel.
CLEAR CLEAR
CLEAR CLEAR
CLEAR
Classification Classification Classification Classification Classification : immediate keyword
Progressively performs:
1) If there is a selection -> CLEAR_SELECTION
2) If there is an activation -> CLEAR_ACTIVE
3) If there is stage output from programmer -> CLEAR_ALL
CLEAR_ACTIVE CLEAR_ACTIVE CLEAR_ACTIVE CLEAR_ACTIVE CLEAR_ACTIVE
Classification Classification Classification Classification Classification
: immediate keyword
Clears the activation in the programmer without destroying stage output.
CLEAR_ALL CLEAR_ALL CLEAR_ALL CLEAR_ALL CLEAR_ALL
Classification Classification
Classification Classification
Classification : immediate keyword
Clears the selection.
Clears the activation.
Clears the programmer totally, all values returned to default or to playback
control.
ODD/EVEN/Sub-selection is reset to ALL.
CLEAR_SELECTION CLEAR_SELECTION
CLEAR_SELECTION CLEAR_SELECTION
CLEAR_SELECTION
Classification Classification Classification Classification Classification : immediate keyword
Clears the selection. No device is selected.
ODD/EVEN/Sub-selection is reset to ALL.
COPY COPY COPY COPY COPY
Classification Classification
Classification Classification Classification
: operational keyword
COPY (source objects) AT (destination objects) [ ENTER ]
Source objects : a range list of objects which are all of type X.
Destination objects: a range list of objects which are all of type Y
Object types X and Y must be equal or compatible.
Source object types Source object types Source object types Source object types Source object types Compatible destination object Compatible destination object Compatible destination object Compatible destination object Compatible destination object
FILTERED COPY INSIDE THE PROGRAMMER All values except default values will
be copied if they pass the filter !
Examples: Examples:
Examples: Examples: Examples:
FIXTURE 2 THRU 10 AT ( select CMY colour mixing) FIXTURE 1 ENTER
This command will copy the CMY colour of fixture 1 to fixtures 2 THRU 10.
You can copy patterns: Set fixture 1 to BLUE and fixture 2 to GREEN.
FIXTURE 3 THRU 10 AT (select colour) FIXTURE 1 THRU 2 ENTER
Fixture 3 will be BLUE, 4 is GREEN, 5 is BLUE, 6 is GREEN …
Source and destination devices can overlap:
FIXTURE 1 THRU 10 AT (select all features) FIXTURE 2 THRU 10 + 1 ENTER
This will perform a circular copy, shifting the values from device to device.
If the source objects are SEQU,CUE or PRESET, the operation will be a