MA Lighting Technology GmbH . Dachdeckerstr. 16 . D-97297 Waldbüttelbrunn . www.malighting.de eMail: [email protected]
184
184
184
184
184
select a User Profile
-
User Data is merged into my profile: The profile elements of the selected profile will be loaded into the profile
of the current user.
-
User Data is merged into the original profile: The profile elements of the selected profile will be loaded into
the profile of the user having the same name, or (if the user does not exist in the current show) the user will be
created.
If
MY PROFILE (yellow button) is chosen, after multiple profiles were selected, the current user’s profile will
successively be overwritten by the selected profiles – not a good deal.
Load parts of a Show
- COPY;–the selected elements will be inserted into the current show, or, if there are elements having the same
name, the current elements will be overwritten by the copied elements.
- MERGE;–the selected elements will be inserted into the current show, if there are elements having the same
name, the current elements will be merged with the copied elements.
Here a concise overview:
- Remove unchanged Items: Will delete all elements in the overview that were not changed, i.e. these
elements will not exist in the current show.
- Remove already imported Items: Will delete all elements in the overview that were already imported using
the COPY or MERGE command.
leave the menu by pressing on the „
X“
12
12
12
12
12 Update Software
Update Software
Update Software
Update Software
Update Software
You can only download the update from our HOMEPAGE (www.malighting.de) using an IBM compatible PC.
After the download execute the file. It is a self extracting archive. You will be asked to insert some empty floppy
disks into drive A: , press OK and your update disks will be created.
Do not update the grandMA right before running a show! Updating the software is a serious thing. MA
Lighting can not always guarantee that your old show will play back correctly after an update !
Update by floppy disk:
press
SETUP
UPDATE SOFTWARE If is should not be possible, to enter this menu (e.g. because a previous update had not
been completed properly), you can open it using the F4 key on the keyboard.
press
Update Software from Floppy
when asked to, insert the floppy and confirm with
OK.
