MA Lighting Technology GmbH . Dachdeckerstr. 16 . D-97297 Waldbüttelbrunn . www.malighting.de eMail: [email protected]
126
126
126
126
126
6.8. Modulators INDEX
6.8. Modulators INDEX
6.8. Modulators INDEX
6.8. Modulators INDEX
6.8. Modulators INDEX
While the modulators that are used for the effects will only influence the whole effect, it is now possible for each
feature to use a modulator for effects, and for the speed, size and shifting of effects within the modulators of the
Fixture and Channel Sheets. The modulators run within the Programmer, i.e. they are not permanent. You can only
save changes as Cues; effects transferred with the TOP button to the modulators will remain unchanged. For each
attribute of a fixture, four modulator settings are available, each of them being individual.
Assigning modulators to a fixture:
select fixtures (here the fixtures 3-5 from the Channel Sheet)
open
FIXTURE or CHANNEL SHEET
in
OPTIONS, press the LAYER CONTROL button; it has a violet background and shows, which values are displayed
in the Sheet (in the SPEED graphics of the Channel Sheet, and in PHASE in the FIXTURE Sheet); the violet or white
triangle shows, which value is being entered into the active Sheet using the Encoder (in the SPEED graphics in the
Fixture Sheet).
select the
FEATURE to be executed by the modulator. (here: Dimmer in the Fixture Sheet)
In the Select menu, select for which features the modulator values are supposed to be valid. In order to do so, press
on the right arrow and select using the Encoder, confirm by pressing on the Encoder, or select the menu by pressing
on the text button.
- SINGLE only the attribute selected from the Fixture or Channel Sheet will be changed
- SINGLE for ACTIVE only the attributes selected from the Fixture or Channel Sheet and now being active will be
changed
- FEATURE only the feature selected from the Fixture or Channel Sheet will be changed
- FEATURE for ACTIVE only the features selected from the Fixture or Channel Sheet and now being active will be
changed
- ALL all attributes of the selected fixture will be changed
- ALL for ACTIVE all attributes selected from the Fixture or Channel Sheet and now being active will be changed
- DEFINED only the defined attributes will be changed In order to do so, press on the left arrow and select the desired
attributes from the menu (attributes with a green background have been selected); this setting remains valid for the
period that the show remains loaded.
- DEFINED for ACTIVE only the defined and active attributes will be changed
select a modulator; in order to do so, press on the right arrow and select it using the Encoder, confirm by pressing
on the Encoder, or select the menu by pressing on the text button
.
