MA Lighting Technology GmbH . Dachdeckerstr. 16 . D-97297 Waldbüttelbrunn . www.malighting.de eMail: [email protected]
48
48
48
48
48
2 . 1 5
2 . 1 5
2 . 1 5
2 . 1 5
2 . 1 5 TIME & DATE Menu
TIME & DATE Menu
TIME & DATE Menu
TIME & DATE Menu
TIME & DATE Menu
Pressing the TIME and DATE key in the SETUP Menu will open the following menu.
You can set TIME and DATE with the encoders below the display. (You can switch encoder functions by
pressing the button Time).
Manual or automatic positioning via GPS
The times of sunrise and sunset change according to your geographical position. If you know your position, you
can enter it in the LOCATION MANUAL mode; if moving around frequently (e.g. when travelling on a ship), it is
advisable to determine your current position by a GPS receiver and let the values be inserted automatically.
Button display:
Location Manual
Location Manual
Location Manual
Location Manual
Location Manual
, fix entry of values.
Set position for the automatic control of (
9.3
9.3
9.3
9.3
9.3
Agenda Menu) sunrise and sunset calculation. Clicking on the
respective keys will open a window, where the position can be set.
Information regarding the respective position can be looked up in a software program that can be downloaded
from the internet at: www.djuga.net/winglobe.html.
o r :
o r :
o r :
o r :
o r :
Button display:
Location Auto
Location Auto
Location Auto
Location Auto
Location Auto
, values are automatically used by a connected GPS receiver.
Pressing the button will open the
GPS-Info
GPS-Info
GPS-Info
GPS-Info
GPS-Info
menu. In this menu, you can modify the settings for a NMEA GPS
receiver connected to the serial port. This receiver will then determine the position of the grandMA. This can be
especially useful e.g. on ships cruising on the oceans. For best satellite reception, check for an unhindered view
to the sky when setting up your equipment.
If the key is set to
Enabled
Enabled
Enabled
Enabled
Enabled
,the clock will automatically switch between summer and winter time. Pressing the
key deactivates this function (Disabled). Pressing the respective key in the
Begin/End
Begin/End
Begin/End
Begin/End
Begin/End
field will open a window
where you can set the beginning and the end of the summer time.
Pressing this key will open a sheet, where the calculated times for Dawn, Sunrise, Sunset and Dusk for yesterday,
today and tommorrow are listed.
Leave this menu with the X key.
measured.
The AUTO GAIN function can be used for grandMAs from serial no. 0055 and later (key will turn dark-grey key,
HARDWARE modification). grandMA ultra-light allows
only
only
only
only
only
Auto Gain.
For
For
For
For
For
grandMA
grandMA
grandMA
grandMA
grandMA
s with serial no. up to 0054, this key can
s with serial no. up to 0054, this key can
s with serial no. up to 0054, this key can
s with serial no. up to 0054, this key can
s with serial no. up to 0054, this key can
not
not
not
not
not
be used.
be used.
be used.
be used.
be used.
You can leave this menu by pressing the X key; all settings will be stored.
