MA lighting grandMA Operating Manual Download Page 6

Page: 6 / 232

MA Lighting Technology GmbH . Dachdeckerstr. 16 . D-97297 Waldbüttelbrunn . www.malighting.de eMail: [email protected]

66666

1 . 6

1 . 6 General Safety Instructions

General Safety Instructions

1. Read all the instructions in the user’s manual, especially the safety

requirements

1.5

Safety requirements

2. Follow all instructions. Keep the user’s manual for later use.
3. Follow all cautions and warnings indicated on the unit.
4. Disconnect the mains plug before cleaning the unit; don’t use any

liquid or spray cleanser. Clean with a dry cloth.

5. Do not use the unit near water. Do not expose it to a humid

environment. Do not spill any liquid over the unit.

6. Unplug this apparatus during lightning storms or when unused for

long periods of time.

7. Do not block or cover any ventilation slots in the housing - they

guarantee the reliable functioning of the unit and protect it against

overheating. Do not install the unit into a frame unless sufficient

ventilation is guaranteed. Install in accordance with the

manufacturer’s instructions.

8. Do not insert any objects through the slots of the unit, as these could

get in contact with live parts or could cause short circuits. This may

cause a fire and an electric shock.

9. Do not place the unit on unstable surfaces. It may fall and get damaged.

10. The unit is provided with a safety plug. This plug can only be used

with safety sockets. These precautions should by all means be followed.

If the plug should not fit into a given socket (e.g. the case with old

sockets), the socket should be replaced by an electrician.

11. Do not ignore the safety purpose of the grounding-type plug. A

grounding type plug has two blades and a third grounding prong. The

third prong is provided for your safety. If the provided plug does not fit

into your outlet, consult an electrician for replacement of the obsole-

te outlet.

12. Do not place any objects on the power cord. Protect it from being

walked on or pinched particularly at plugs and the point where they

exit from the apparatus.

13. If using an extension cord, make sure the rated output of all units

connected in aggregate does not exceed the maximum rated output

of the extension cord. The rated output of the units plugged into the

socket should in aggregate not exceed 10 amperes.

14. If the power cord or the mains plug is damaged, let a qualified technician replace it immediately.
15. Only use power cords which are marked as safety-proof.
16. Refer all servicing to qualified service personnel. Servicing is required when the apparatus

has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been

spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or

moisture, does not operate normally, or has been dropped. Besides others, you run the risk of

suffering an electric shock.

17. All service work should be exclusively performed by qualified service technicians.
18. Do not use any high-power walkie-talkies or cellular phones near the unit.
19. If one of the following conditions occurs,

please disconnect the mains plug and

call your dealer or technical support!

– Power cord or mains plug is damaged or worn.

– Liquid penetrated the unit.

– The unit was exposed to rain or high ambient humidity.

– The unit does not function properly, even when following all the instructions in the manual.

Only manipulate the controls as stated in the manual, wrong settings on the controls may

damage the unit.

– The unit fell and the housing was damaged.

Please note that this console is based on complex software and as you probably know from

your own computer experience, software crashes can occur on occasion. But be assured,

that we will do our best to keep them rare exceptions.