Hotline: +49 5251 688865-99
Hotline: +49 5251 688865-99
Hotline: +49 5251 688865-99
Hotline: +49 5251 688865-99
Hotline: +49 5251 688865-99
. Operating Manual grandMA Version 5.4
45
45
45
45
45
Setup - Menü g Light + UltraLight
Setup - Menü MICRO
2.13
2.13
2.13
2.13
2.13 Settings in the DEFAULTS Menu
Settings in the DEFAULTS Menu
Settings in the DEFAULTS Menu
Settings in the DEFAULTS Menu
Settings in the DEFAULTS Menu
Pressing the DEFAULT key in the SETUP menu will bring you to the DEFAULTS menu.
Programming
Programming
Programming
Programming
Programming
This column will display the default times and settings that will be used when storing Cues and Sequences.
Using the Encoders, you can adjust the individual times and trigger calls.
DUAL DIGIT VALUE ENTRY: Entries performed over the numeric block, have to be done in the conventional
way; entry 2_0 will yield a value of 20.
SINGLE DIGIT VALUE ENTRY: Entries performed over the numeric block will be done in factors of ten; entry 2 will
yield 20, 0_5 will become 5, and 1_5 will yield 15 (without switching to DUAL).
Default AT: Here, enter the percentage value that the selected fixtures or dimmers are to take when the 2x AT
command is used.
-
DEFAULTS: By pressing this key, you will enter the DEFAULTS menu. All general presets can be set in this
menu.
2.13
2.13
2.13
2.13
2.13
Settings in the DEFAULTS menu
- By pressing this key you will enter the DATE and TIME menu.
2.15
2.15
2.15
2.15
2.15
DATE and TIME
- By pressing this key you can change the display language.
- To switch the screen saver off an on. By pressing the key briefly, a window will appear where you can select the
time after which the screen saver will activate.
- By pressing this key, you will reach the UPDATE SOFTWARE menu. The operating system, the operating software
as well as the console software and the fixtures can be updated from this menu.
12
12
12
12
12
Software Update
Close menu with
X.
2.12.1 OOPS Function Options*
2.12.1 OOPS Function Options*
2.12.1 OOPS Function Options*
2.12.1 OOPS Function Options*
2.12.1 OOPS Function Options*
If the OOPS function is activated, the will be able undo commands or values that you set. This function requires a
large amount of system resources. This requires a lot of processor power, what could slow down the console
performance. This could interfere the execution of programs; that is why you can switch it of completely or for in-
dividual functions.
1.9
1.9
1.9
1.9
1.9
OOPS function
General Enabled: If this key is set to Enabled, all OOPS functions are available – except for VIEWS commands
and entries in the PROGRAMMER ( both of which can be switched off separately; for further information see
below)
General Disabled: Pressing the Enabled key next to General will toggle it over to Disabled and all OOPS functions
will be switched off
Oops for Views : If the key is set to Enabled, OOPS functions can be used for VIEWS calls and creating or
deleting VIEWS keys. Pressing the Enabled key will toggle it to Disabled and the OOPS function can no longer be
used for VIEWS commands.
Oops for Programmer : If the key is set to Enabled, OOPS functions are available for all entries in the
PROGRAMMER (selecting/deselecting or activating/deactivating Fixture or Dimmer channels). Pressing the
Enabled key will toggle it to Disabled and the OOPS function can no longer be used for entries in the
PROGRAMMER.
In strong bass enviroments (vibrations), please switch off all OOPS settings and “Autosave“ (disabled).
11 Saving and Loading a Show (Autosave)
Close menu with X. Changes will be saved.
