Hotline: +49 5251 688865-99
Hotline: +49 5251 688865-99
Hotline: +49 5251 688865-99
Hotline: +49 5251 688865-99
Hotline: +49 5251 688865-99
. Operating Manual grandMA Version 5.4
47
47
47
47
47
Triggermonitor
2.14
2.14
2.14
2.14
2.14 Setting Sound Signals
Setting Sound Signals
Setting Sound Signals
Setting Sound Signals
Setting Sound Signals
The sound signal is used for triggering Chasers and Sequences. In other words, this is an electronic, graphic
equalizer. In order to slowly balance any fluctuations of the audio signal, a specific compressor function has been
integrated.
You will find an integrated adjustable HOLD-OFF function. This function will prevent any double triggers (for
example: with fast BASSDRUM beats). Beats will be automatically recognized via the incoming sound signal
(BPM).
Press TOOLS
Press Button
Sound Settings
Sound Settings
Sound Settings
Sound Settings
Sound Settings
to open the menu
To set an equalizer, pull the respective “slider“ to the desired position. In the left lower corner, there is a visual
trigger signal (monitor) for your orientation. The small dot on the left side of the HOLD Function will indicate the
remaining HOLD time. The small dot on the left side of the GAIN indicator will show the compression rate of the
audio signal.
The right small dot will indicate the state of compression of the audio signal. The sound signal is visualized in the
lower left part of the display. The analysis of the sound signal will be indicated in the smaller right part of the
window, including indication of the recognised BPM (Beats per minute). By moving the BPM slider, the beat can
be set. The next-possible beat will be recognised from the incoming audio signal and will be used to control the
BPM.
If the BPM key is ON, the currently recognised beat will be used. When switching the BPM to OFF, the last
recognised beat at the time will remain unchanged and will be used. You can adjust the value using the BPM
slider.
If the Auto Stop key is on ON, the Chase or the effect will be stopped when there is no sound signal. If the Auto
Fader key is also on ON, the Chase or the effect will be faded out when there is no sound signal.
When you switch the Auto Stop key to OFF, the Chaser or effect will continue with the latest BPM value
Pan/Tilt: - Trackball button on (LED is on) - Trackball controls Pan and Tilt
Mouse - Trackball button off (LED is off) - Trackball controls the mouse, using the Prev., SET and Next keys,
you can operate the appropriate mouse buttons.
Pan/Tilt: - Trackball button on (LED is on) - Trackball controls Pan and Tilt
Mouse/OFF - Trackball button (LED blinking) - Trackball controls the mouse, using the Prev., SET and Next keys,
you can operate the appropriate mouse buttons.
- Trackball button off (LED off) - Trackball has no function
RESET DEFAULTS key: Will reset all changes back to factory settings.
Encoder labelling for figures within the Cue Timing column.
Use SAVE TO GLOBAL USER PROFILE in the logged-in user’s profile to save changed DEFAULT settings in
the TOOLS menu. You can reload these individual DEFAULT settings with RESTORE FROM GLOBAL USER
PROFILE.
