MA Lighting Technology GmbH . Dachdeckerstr. 16 . D-97297 Waldbüttelbrunn . www.malighting.de eMail: [email protected]
46
46
46
46
46
Playback Timing
Playback Timing
Playback Timing
Playback Timing
Playback Timing
The duration set for the
OFF Time
OFF Time
OFF Time
OFF Time
OFF Time
will be used when switching off Executors (OFF key).
GOTO & GO-:
GOTO & GO-:
GOTO & GO-:
GOTO & GO-:
GOTO & GO-:
If a specific time is set when calling up a Cue using the GOTO or GO- function, the Cue will be
called up with this duration. If Cue Timing was set, the Cue will be called up with the duration programmed in this
Cue. You can overwrite the Goto Default duration at any time.
4.2.3
4.2.3
4.2.3
4.2.3
4.2.3
Default Sequence (Master Sequence)
Here you can enter a Default time for MIB DELAY and FADE.
5.1.4
5.1.4
5.1.4
5.1.4
5.1.4
Move in Black Option
Executor Defaults
Executor Defaults
Executor Defaults
Executor Defaults
Executor Defaults
Default is Sequence/Chaser:
Default is Sequence/Chaser:
Default is Sequence/Chaser:
Default is Sequence/Chaser:
Default is Sequence/Chaser:
With this key, you can define, whether a newly programmed sequence will be
created as a Chaser (one look after another running automatically) or as a Sequence (press go for cue 1 and then
press go for ce 2 etc.) (default setting).
Chase Fade:
Chase Fade:
Chase Fade:
Chase Fade:
Chase Fade:
Here, you can define the preset for Chase Fade.
Chase Speed:
Chase Speed:
Chase Speed:
Chase Speed:
Chase Speed:
Here, you can define the default Chase Speed and Effect Speed.
Readout:
Readout:
Readout:
Readout:
Readout:
By pressing the key, you can here switch the Chaser Speed between BPM (beats per minute), Hz (beats
per second) and SEC (seconds).
The default Chaser Speed is also used as the default for the Effect Speed.
Crossfade Reload/Permanent:
Crossfade Reload/Permanent:
Crossfade Reload/Permanent:
Crossfade Reload/Permanent:
Crossfade Reload/Permanent:
Here, you can define whether manual cross fading should be performed just
in one direction (Reload) or in both directions (Permanent) when moving a fader set to cross fade.
Sheet Sorting
Sheet Sorting
Sheet Sorting
Sheet Sorting
Sheet Sorting
By the SORTING column, you define according to which aspects the fixtures and channels shall be sorted
when setting up new windows. You can switch to the next option by clicking on the respective keys.
Sheet Fontsize
Sheet Fontsize
Sheet Fontsize
Sheet Fontsize
Sheet Fontsize
With the FONTSIZES column, you can define the type size of new windows.
Sheet Readout
Sheet Readout
Sheet Readout
Sheet Readout
Sheet Readout
Preset for the output of numbers in the OUTPUT, CHANNEL and PATCH windows.
Misc
Misc
Misc
Misc
Misc
– Function of BLACKOUT key:
PUSH:
serves as push key (key)
TOGGLE:
will remain active when pressed
DISABLED: switches the blackout function off
– Function of the GRANDMASTER FADER:
ENABLED: Fader active
DISABLED: Fader inactive
– KEYBOARD GERMAN/ENGLISH: Switch option for country-specific keyboards.
– KEYBOARD Dot-Zero: Switching the key sequence on the numeric keyboard to Zero-Dot. The key caps
can be exchanged without any problems.
1.7.2
1.7.2
1.7.2
1.7.2
1.7.2
Layout and Controls grandMA item 19 or
1.7.1/3
1.7.1/3
1.7.1/3
1.7.1/3
1.7.1/3
Layout
and Controls grandMA (ultra) light item 21
– With the
Preset Color
Preset Color
Preset Color
Preset Color
Preset Color
key, three different presets for the color scheme of displaying preset keys
can be called up.
– Functions of the Trackball (not for grandMA light and Ultra-light):
Pan/Tilt: - Trackball button on (LED is on) - Trackball controls Pan and Tilt
OFF
- Trackball button off (LED is off) - Trackball has no function
