background image

INS #

IL524026EN

Neo-Ray

Risk of Fire, Electrical Shock, Cuts or other Casualty Hazards- Installation and maintenance of this 

product must be performed by a qualified electrician. This product must be installed in accordance 

with the applicable installation code by a person familiar with the construction and operation of the 

product and hazards involved. 

Risk of Fire and Electric Shock- Make certain power is OFF before starting installation or attempting 

any maintenance. Disconnect power at fuse or circuit breaker.

Risk of Fire- Minimum 90°C supply conductors.

Risk of Burn- Disconnect power and allow fixture to cool before handling or servicing.

Risk of Personal Injury- Due to sharp edges, handle with care.

Failure to comply with these instructions may result in death, serious bodily injury and property 

damage.

WARNING

DISCLAIMER OF LIABILITY: 

Cooper Lighting Solutions

 assumes no liability for damages or losses of any kind 

that may arise from the improper, careless, or negligent installation, handling or use of this product. 

 

IMPORTANT:

 Read carefully before installing fixture. Retain for future reference.  

NOTICE:

 Green ground screw provided in proper location. Do not relocate.

NOTICE:

 Fixture may become damaged and/or unstable if not installed properly.

Note:

 Specifications and dimensions subject to change without notice.

ATTENTION Receiving Department:

 Note actual fixture description of any shortage or noticeable damage on 

delivery receipt. File claim for common carrier (LTL) directly with carrier. Claims for concealed damage must be 
filed within 15 days of delivery. All damaged material, complete with original packing must be retained.

Installation Instructions – 

Define S122-125 IP 

Wiring Table

Power Supply (Input)

When Applicable

Black (BK) - Hot

White (WH) - Neutral

Green (GN) - Ground

Purple (PU) - 0-10V (+)

Gray (GR) - 0-10V (-)

Emergency Hot – Black/Red
Emergency Neutral – White/Red
Second Circuit Hot – Black/Orange
Second Circuit Neutral – White/Orange
Second Circuit Dimming Positive – Orange
Second Circuit Dimming Negative – Yellow
Battery/Emergency Unswitched Hot – Blue

Maximum Sink/Source current per fixture is 6mA

Summary of Contents for Neo-Ray Define S122 IP






Reviews: