manualshive.com logo in svg

Freescale Semiconductor MSC8144E, Reference Manual

The Freescale Semiconductor MSC8144E Reference Manual is a comprehensive guide for users of this high-performance semiconductor chip. This essential manual is available for free download on our website, providing detailed instructions and insights into utilizing the product's advanced features and capabilities. Don't miss the opportunity to enhance your experience with MSC8144E, download your manual now at manualshive.com.

Share
Download
background image

MSC8144E Reference Manual, Rev. 3

19-22

 Freescale 

Semiconductor

TDM Interface

19.2.5   TDM Local Memory

Received data is temporarily stored in the TDM receive local memory until it is transferred to the 
receive buffers mapped on the system I/F. A single data transfer from TDM local memory to a 
memory-mapped region on the system I/F transfers at least 64 bits of data. Each channel can store 
more than 64 bits before the data is written to the buffers mapped on the system I/F. The 
TDMxRFP[RCDBL] field (see page 19-48) provides an upper boundary on the number of 
receive bits that can be stored in the TDM local memory. The receive data latency is defined as 
the time between receiving data and the time when it is available for processing by an SC3400 
core. Reducing the TDMxRFP[RCDBL] value reduces the receive data latency. However, 
reading the TDM local memory imposes more strict latency requirements on the system I/F. The 
maximum receive data latency is calculated as follows: RCDBL /RCS 

× 

receive frame time.

When the amount of received data exceeds the size of the TDM receive local memory, the 
TDMxRER[OLBE] bit is set (see page 19-69). If the TDMxRIER[OLBEE] bit is also set, an 
error interrupt is generated. This error should not occur during normal operation. It indicates that 
the TDM has not received enough bandwidth on the system I/F and therefore cannot write the 
data into the destination memory (the data buffer).

Data transmitted from memories mapped on the system I/F is temporarily stored in the TDM 
transmit local memory until it is transferred externally. A single data transfer from the system I/F 
to TDM local memory transfers at least 64 bits of data. Each channel can store more than 64 bits 
before it is transmitted externally. The TDMxTFP[TCDBL] field provides an upper boundary on 
the number of transmit bits that can be stored in TDM local memory. The transmit data latency is 
defined as the time between when the data is read from the buffers mapped to the system I/F and 
when it is transmitted externally. Reducing the TDMxTFP[TCDBL] value reduces the transmit 
data latency. However, writing the TDM local memory imposes more strict latency requirements 
on the internal MBus. The maximum transmit data latency is calculated as follows: TCDBL / 
TCS 

×

 transmit frame time.

When the TDM cannot transfer data from data buffers to TDM local memory, an underrun 
occurs. When the TDM transmit local memory is empty, the TDMxTER[ULBE] bit (see 
page 19-70) is set and the TDMxTIER[ULBEE] bit is also set, an error interrupt is generated. 
This error should not occur during normal operation. It indicates that the TDM has not received 
enough bandwidth on the system I/F and therefore cannot read the data from the source memory 
into TDM transmit local memory. The minimum latency is achieved when the RCDBL/TCDBL 
field is clear (only 64 bits are stored in the TDM local memory). For example, the minimum 
latency for a T1 application with 8 bits per channel and a frame length of 125 

μ

s is equal to 1 ms. 

T1 minimum latency= 64/8 

×

 125 

μ

s.

Summary of Contents for MSC8144E































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for MSC8144E

Paradyne COMSPHERE 3800 Series Release Note preview
COMSPHERE 3800 Series
Brand: Paradyne Pages: 88
Paradyne COMSPHERE 3800PLUS Supplementary Manual preview
COMSPHERE 3800PLUS
Brand: Paradyne Pages: 5
FOR-A USF-105AS Operation Manual preview
USF-105AS
Brand: FOR-A Pages: 39
iCEBOX Z86K15 Manual preview
Z86K15
Brand: iCEBOX Pages: 57
Omron JUSP-NS500 Datasheet preview
JUSP-NS500
Brand: Omron Pages: 6
Patton electronics ipRocketLink IAD 3086 Quick Start Manual preview
ipRocketLink IAD 3086
Brand: Patton electronics Pages: 12
Supero AOC-1UIPMI-B User Manual preview
AOC-1UIPMI-B
Brand: Supero Pages: 53
IBM 2078-4F4 Quick Installation Manual preview
2078-4F4
Brand: IBM Pages: 130
Intellinet 720564 Instructions preview
720564
Brand: Intellinet Pages: 2
Cypress Semiconductor CY7C68023 Specification Sheet preview
CY7C68023
Brand: Cypress Semiconductor Pages: 9
El.Mo 090010932 User Manual preview
090010932
Brand: El.Mo Pages: 16
NuDAQ ACL-8112 Series User Manual preview
ACL-8112 Series
Brand: NuDAQ Pages: 92
Advantech SNMP-1000-E2B1E How To Connect preview
SNMP-1000-E2B1E
Brand: Advantech Pages: 4
Omron JUNMA PULSE Datasheet preview
JUNMA PULSE
Brand: Omron Pages: 4
ICP DAS USA VXC-114U Series Quick Start Manual For preview
VXC-114U Series
Brand: ICP DAS USA Pages: 8
protech PCI-531LF Operation Manual preview
PCI-531LF
Brand: protech Pages: 84
b&t RTL8720D Instruction Manual preview
RTL8720D
Brand: b&t Pages: 34
Aprotech INTEL CORE i5 SYSTEM BOARD User Manual preview
INTEL CORE i5 SYSTEM BOARD
Brand: Aprotech Pages: 154

Brands by name

Popular brands

Load more brands