manualshive.com logo in svg

Freescale Semiconductor MSC8144E, Reference Manual

The Freescale Semiconductor MSC8144E Reference Manual is a comprehensive guide for users of this high-performance semiconductor chip. This essential manual is available for free download on our website, providing detailed instructions and insights into utilizing the product's advanced features and capabilities. Don't miss the opportunity to enhance your experience with MSC8144E, download your manual now at manualshive.com.

Share
Download
background image

MSC8144E Reference Manual, Rev. 3

19-26

 Freescale 

Semiconductor

TDM Interface

19.2.6.3   Threshold Pointers and Interrupts

The receive data buffers share two threshold levels. The TDM notifies the SC3400 core each time 
it fills the receive buffer up to a threshold level. An example use of thresholds is the 
implementation of double buffering with the first threshold in the middle of a buffer and the 
second at the last eight bytes of the buffer.

When the TDM receiver fills the receive buffer through the system interface to an offset defined 
by the first threshold, which is the TDMxRDBFT[RDBFT] field (see page 19-59), the 
TDMxRER[RFTE] bit is set. If the TDMxRIER[RFTEE] bit is also set, a first threshold interrupt 
is generated. The interrupt can be generated as pulse or level, as determined by the 
TDMxRIR[RFTL] bit. If the interrupt is level, the ISR should clear the TDMxRER[RFTE] bit by 
writing a 1 to it. If the interrupt is pulse, then there is no need to clear the status bit. When the 
interrupt is asserted in the EPIC, then the SC3400 core can read all the receive buffers from their 
beginning up to the byte to which the first threshold (RDBFT) points. Meanwhile, the TDM 
keeps writing new data to the second part of the buffer.

When the TDM receiver fills the receive buffer through the system interface up to an offset 
defined by the second threshold, which is the TDMxRDBST[RDBST] field (see page 19-61), the 
TDMxRER[RSTE] bit is set. If the TDMxRIER[RSEEE] bit is also set, a second threshold 
interrupt is generated. The second threshold interrupt can generate as pulse or level, as 
determined by the TDMxRIR[RSTL] bit. If the interrupt is level, the ISR should clear the 
TDMxRER[RSTE] bit by writing a 1 to it. If the interrupt is pulse, there is no need to clear the 
status bit. When the interrupt is asserted in the EPIC, then the SC3400 core can read all the 
receive buffers up to the byte to which the second threshold (TDMxRDBST[RDBST]) points. 
Meanwhile, the TDM keeps writing new data to the first part of the buffer.

The transmit data buffers also share two threshold levels. The TDM notifies the SC3400 core 
each time it reads from the transmit buffer to a threshold level. When the TDM transmitter reads 
the transmit buffer through the system interface to an offset defined by the first threshold, which 
is the TDMxTDBFT[TDBFT] field, the TDMxTER[TFTE] bit is set. If the TDMxTIER[TFTEE] 
bit is also set, a first threshold interrupt is generated. The interrupt can generate as pulse or level, 
as determined by the TDMxTIR[TFTL] bit. If the interrupt is level, then the ISR should clear the 
TDMxTER[TFTE] bit by writing a 1 to it. If the interrupt is pulse, there is no need to clear the 
status bit. When the interrupt is asserted in the EPIC, then the SC3400 core can fill all the 
transmit buffers from their beginning up to the byte to which the first threshold (TDBFT) points. 
Meanwhile, the TDM continues reading new data from the second part of the buffer.

When the TDM transmitter reads the transmit buffer through the system interface up to an offset 
defined by the second threshold, which is the TDMxTDBST[TDBST] field, the 
TDMxTER[TSTE] bit is set. If the TDMxTEIR[TSTEE] bit is also set, a second threshold 
interrupt is generated. The second threshold interrupt can generate as pulse or level, as 
determined by the TDMxTIR[TSTL] bit. If the interrupt is level, the ISR should clear the 
TDMxTER[TSTE] bit by writing a 1 to it. If the interrupt is pulse, then there is no need to clear 

Summary of Contents for MSC8144E































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for MSC8144E

D-Link ShareCenter Pulse DNS-320 Quick Install Manual preview
ShareCenter Pulse DNS-320
Brand: D-Link Pages: 2
D-Link DFE-680TX Quick Install Manual preview
DFE-680TX
Brand: D-Link Pages: 4
Campbell NL115 Instruction Manual preview
NL115
Brand: Campbell Pages: 42
Qualys GUARD Quick Start Manual preview
GUARD
Brand: Qualys Pages: 2
Amperes iPX5500 Instruction Manual preview
iPX5500
Brand: Amperes Pages: 8
LORD AP5103 Series Technical Manual preview
AP5103 Series
Brand: LORD Pages: 9
ADC HiGain HLU-231 List 8F Quick Installation preview
HiGain HLU-231 List 8F
Brand: ADC Pages: 7
Renesas Converter Board R0E5212BACFG00 User Manual preview
Converter Board R0E5212BACFG00
Brand: Renesas Pages: 6
TANDBERG D5018501 Hardware User Manual preview
D5018501
Brand: TANDBERG Pages: 3
Advantech MIC-730AI User Manual preview
MIC-730AI
Brand: Advantech Pages: 36
NEC uPD75P3116 Datasheet preview
uPD75P3116
Brand: NEC Pages: 70
S&T TPMS1209T02-ER User Manual preview
TPMS1209T02-ER
Brand: S&T Pages: 28
SafeHome NVR903 Manual preview
NVR903
Brand: SafeHome Pages: 24
Lattice Semiconductor LatticeMico GPIO Manual preview
LatticeMico GPIO
Brand: Lattice Semiconductor Pages: 28
RAID N8103-134 Setup Manual preview
N8103-134
Brand: RAID Pages: 80
Comelit IPNVR016A User Manual preview
IPNVR016A
Brand: Comelit Pages: 140
EMC VNX5300 Block Hardware Information Manual preview
VNX5300 Block
Brand: EMC Pages: 88
SilverStone argon series User Manual preview
argon series
Brand: SilverStone Pages: 16

Brands by name

Popular brands

Load more brands