manualshive.com logo in svg

Freescale Semiconductor MSC8144E, Reference Manual

The Freescale Semiconductor MSC8144E Reference Manual is a comprehensive guide for users of this high-performance semiconductor chip. This essential manual is available for free download on our website, providing detailed instructions and insights into utilizing the product's advanced features and capabilities. Don't miss the opportunity to enhance your experience with MSC8144E, download your manual now at manualshive.com.

Share
Download
background image

MSC8144E Reference Manual, Rev. 3

xxxvi

 Freescale 

Semiconductor

Contents

26.4.3.11

AESU FIFOs  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  26-48

26.4.4

Message Digest Execution Unit (MDEU). . . . . . . . . . . . . . . . . . . . . . . . . . .  26-48

26.4.4.1

MDEU Mode Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  26-49

26.4.4.2

MDEU Key Size Register  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  26-50

26.4.4.3

MDEU Data Size Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  26-50

26.4.4.4

MDEU Reset Control Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  26-51

26.4.4.5

MDEU Status Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  26-51

26.4.4.6

MDEU Interrupt Status Register  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  26-51

26.4.4.7

MDEU Interrupt Mask Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  26-52

26.4.4.8

MDEU ICV Size Register  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  26-52

26.4.4.9

MDEU End_of_Message Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  26-52

26.4.4.10

MDEU Context Registers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  26-52

26.4.4.11

MDEU Key Registers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  26-53

26.4.4.12

MDEU FIFOs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  26-53

26.4.5

ARC Four Execution Unit (AFEU). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  26-53

26.4.5.1

AFEU Mode Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  26-54

26.4.5.1.1

Core Processor-Provided Context via Prevent Permute . . . . . . . . . . . .  26-54

26.4.5.1.2

Dump Context . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  26-54

26.4.5.2

AFEU Key Size Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  26-54

26.4.5.3

AFEU Context/Data Size Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  26-55

26.4.5.4

AFEU Reset Control Register  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  26-55

26.4.5.5

AFEU Status Register. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  26-55

26.4.5.6

AFEU Interrupt Status Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  26-56

26.4.5.7

AFEU Interrupt Mask Register  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  26-56

26.4.5.8

AFEU End_of_Message Register. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  26-56

26.4.5.9

AFEU Context  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  26-57

26.4.5.9.1

AFEU Context Memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  26-57

26.4.5.10

AFEU Key Registers  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  26-57

26.4.6

Kasumi Execution Unit (KEU) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  26-58

26.4.6.1

KEU Mode Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  26-59

26.4.6.2

KEU Key Size Register  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  26-59

26.4.6.3

KEU Data Size Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  26-59

26.4.6.4

KEU Reset Control Register  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  26-60

26.4.6.5

KEU Status Register. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  26-60

26.4.6.6

KEU Interrupt Status Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  26-60

26.4.6.7

KEU Interrupt Mask Register. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  26-61

26.4.6.8

KEU Data Out Register (F9 MAC)  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  26-61

26.4.6.9

KEU End_of_Message Register. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  26-61

26.4.6.10

KEU IV_1 Register  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  26-61

26.4.6.11

KEU ICV_In Register  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  26-61

26.4.6.12

KEU IV_2 Register (Fresh) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  26-62

Summary of Contents for MSC8144E































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for MSC8144E

M-Audio Computer Quick Start Manual preview
Computer
Brand: M-Audio Pages: 10
Paradyne 3163 Quick Reference preview
3163
Brand: Paradyne Pages: 16
Klark Teknik DN9650 Operator'S Manual preview
DN9650
Brand: Klark Teknik Pages: 50
Optostar OP-8000-EDFA-1U Series Manual preview
OP-8000-EDFA-1U Series
Brand: Optostar Pages: 9
Balluff Easy Tool-ID BSG TID-05-T30-00-005 Installation And Operation Manual preview
Easy Tool-ID BSG TID-05-T30-00-005
Brand: Balluff Pages: 46
MEMON memonizerWORKSTATION Quick Start Manual preview
memonizerWORKSTATION
Brand: MEMON Pages: 2
Caton NVE 9100 User Manual preview
NVE 9100
Brand: Caton Pages: 18
Dataprobe iBoot-Exp Manual preview
iBoot-Exp
Brand: Dataprobe Pages: 5
KonNad SinoCon C2000-C2-SHK0401-BB1 User Manual preview
SinoCon C2000-C2-SHK0401-BB1
Brand: KonNad Pages: 12
ST METERS AND MORE UM2241 User Manual preview
METERS AND MORE UM2241
Brand: ST Pages: 26
IBM 25CPC710 Application Note preview
25CPC710
Brand: IBM Pages: 8
IBM SA23-1325-01 Installation And Using Manual preview
SA23-1325-01
Brand: IBM Pages: 44
Ezquest Boa K16766 User Manual preview
Boa K16766
Brand: Ezquest Pages: 65
LevelOne GSW-0508 User Manual preview
GSW-0508
Brand: LevelOne Pages: 10
SET 89299 Technical Description preview
89299
Brand: SET Pages: 38
IC Realtime Network Video Recorder User Manual preview
Network Video Recorder
Brand: IC Realtime Pages: 118
IC Realtime Mobile Network Video Recorder User Manual preview
Mobile Network Video Recorder
Brand: IC Realtime Pages: 158
RadioLAN Campus BridgeLINK User Manual preview
Campus BridgeLINK
Brand: RadioLAN Pages: 146

Brands by name

Popular brands

Load more brands