Advantech SNMP-1000-E2B1E How To Connect Download Page 1

Page: 1 / 4

Enabling an Intelligent Planet

Page 1 /4

FAQ: How to connect SNMP-1000-E2B1E in ACP-4360 -B/5360/7360?

This FAQ will help you to connect the SNMP-1000-E2B1E in ACP-4360-B/5360/7360.

Figure 1. Connectors on SNMP-1000-E2B1E

Step 1. Connect the Power Button Cable and Reset Button Cable to CPU board, as shown in Figure 2.

Figure 2.

Summary of Contents for SNMP-1000-E2B1E

Page 1: ...SNMP 1000 E2B1E in ACP 4360 B 5360 7360 This FAQ will help you to connect the SNMP 1000 E2B1E in ACP 4360 B 5360 7360 Figure 1 Connectors on SNMP 1000 E2B1E Step 1 Connect the Power Button Cable and Reset Button Cable to CPU board as shown in Figure 2 Figure 2 ...

Page 2: ...re 3 Temperature sensor to CN4 Alarm Reset to CN17 LED indicator to CN18 FANs to FAN1 7 Figure 3 Note The SNMP 1000 E2B1E can detect the fan quantities automatically so when you use SNMP 1000 E2B1E and connect fans to it please must set the fan number to 0 on the SAS SATA HDD backplane refer to following table Otherwise it will cause abnormal alarm ...

Page 3: ...Step 3 Connect the rest cables as shown in Figure 4 Power connector to CN1 10 100Base T LAN to CN2 External HDD LED connector from CPU board to CN26 Figure 4 Step 4 Screw the carrier board in ACP 4360 B 5360 7360 as shown in figure 5 Figure 5 ...

Page 4: ...Enabling an Intelligent Planet Page 4 4 Step 5 Connect the Kernel Module on Carrier board as shown in figure 6 Figure 6 ...