Enabling an Intelligent Planet
Page 2 /4
Step 2. Connect the cables from ACP-4360-B/5360/7360 to the carrier board of SNMP-1000-E2B1E, as
shown in Figure 3.
Temperature sensor to CN4
Alarm Reset to CN17
LED indicator to CN18
FANs to FAN1~7
Figure 3.
<Note>
The SNMP-1000-E2B1E can detect the fan quantities automatically, so when you use
SNMP-1000-E2B1E and connect fans to it, please must set the fan number to ‘0’ on the SAS/SATA HDD
backplane (refer to following table). Otherwise it will cause abnormal alarm.
