Club Car IntelliTach XRT 1550, Maintenance And Service Manual

Page: 503 / 564

HYDRAULIC ATTACHMENT SYSTEM Attachment Interface
2007 Carryall 295/295 SE & XRT 1550/1550 SE Gasoline, Diesel and IntelliTach M & S Manual Page 16-5
16
Attachment Arm Installation
1. Align the vehicle with the attachment arms (Figure 16-12, Page 16-5) .
2. Stop the engine, put the Forward/Reverse Handle in NEUTRAL, engage the park brake, unfasten your
seat belt, and exit the vehicle.
3. Remove the retaining rings (2) and the pins (1) from the attachment arm (both sides) (Figure 16-13,
Page 16-6) .
4. Raise the attachment arms and align the holes in the attachment arms to the vehicle mounting holes
(Figure 16-13, Page 16-6) .
5. Install the pins (2) and retaining rings (1) (both sides).
ý
WARNING
• Do not have hands in the area of the cylinders when extending or retracting the cylinders.
Figure 16-9 Secure Attachment and Interface Cylin-
ders
Figure 16-10 Remove Attachment Arm Retaining Pins
Figure 16-11 Attachment Arm Pins and Retaining
Rings
Figure 16-12 Align the Vehicle to Attachment Arms