DIESEL ENGINE, MUFFLER, FUEL SYSTEM, AND CLUTCHES
Air Intake System
Page 13c-26
2007 Carryall 295/295 SE & XRT 1550/1550 SE Gasoline, Diesel and IntelliTach M & S Manual
13C
4. Connect the battery cables, positive (+) cable first, and tighten the hardware to 144 in-lb (16 N·m). Coat
terminals with Battery Terminal Protector Spray (CCI P/N 1014305).
AIR FILTER OUTLET HOSE REMOVAL
1. Turn the key switch OFF and remove the key. Set the park brake. Place the Forward/Reverse handle in
NEUTRAL.
2. Disconnect the battery cables as instructed.
See WARNING “To avoid unintentionally starting...” in
General Warning, Section 1, Page 1-1.
3. Disconnect the air outlet hose from the air filter canister outlet port.
4. Disconnect the air outlet hose from the carburetor inlet port and remove the hose.
AIR FILTER OUTLET HOSE INSTALLATION
1. Install the air outlet hose at the carburetor inlet port and secure the air outlet hose with a clamp.
2. Install the air outlet hose at the air filter outlet port and secure the air outlet hose with a clamp.
3. Connect the battery cables, positive (+) cable first, and tighten the hardware to 144 in-lb (16 N·m). Coat
terminals with Battery Terminal Protector Spray (CCI P/N 1014305).
Figure 13c-27 Air Port on Frame
Figure 13c-28 Air Filter Inlet Hose
Summary of Contents for IntelliTach XRT 1550
