Club Car IntelliTach XRT 1550, Maintenance And Service Manual

Page: 426 / 564

HONDA GASOLINE ENGINE, MUFFLER, FUEL SYSTEM, AND CLUTCHES Clutches
Page 13b-36 2007 Carryall 295/295 SE & XRT 1550/1550 SE Gasoline, Diesel and IntelliTach M & S Manual
13B
DRIVEN CLUTCH
See General Warning, Section 1, Page 1-1.
Driven Clutch Removal
1. Turn the key switch OFF and remove the key. Set the park brake. Place the Forward/Reverse handle in
NEUTRAL.
2. Disconnect the battery cables as instructed. See WARNING “To avoid unintentionally starting...” in
General Warning, Section 1, Page 1-2.
3. Disconnect the spark plug wires. See WARNING “To avoid unintentionally starting...” in General
Warning, Section 1, Page 1-2.
4. Remove the top air filter hose from the filter canister.
5. Remove the clutch outer cover. See Clutch Outer Cover Removal on page 13b-39.
6. Remove the drive belt as instructed. See Drive Belt Removal on page 13b-31.
7. Remove the bolt and washer from the center of the clutch.
8. Remove the driven clutch from the vehicle. See following CAUTION.
CAUT ION
• Do not hit or tap the clutch with a hammer. Do not pry the clutch. These actions will damage
the clutch.
Driven Clutch Disassembly
The following service tools are required to disassemble and assemble the driven clutch. They are available
from a service parts representative:
• Spring compression base (CCI P/N 102603501)
• Spring compression collar (CCI P/N 102605201)
• Spring compression nut (CCI P/N 102606101
)