Club Car IntelliTach XRT 1550, Maintenance And Service Manual

Page: 359 / 564

KAWASAKI GASOLINE ENGINE, MUFFLER, FUEL SYSTEM, AND CLUTCHES Exhaust System
2007 Carryall 295/295 SE & XRT 1550/1550 SE Gasoline, Diesel and IntelliTach M & S Manual Page 13a-7
13A
5. Remove the two bolts and large flat washers that secure the muffler to the chassis and remove the muf-
fler. See following WARNING and NOTE.
ý
WARNING
• Always wear eye protection when springs are removed or installed.
NOTE: Replace springs that show signs of brittleness, broken coils, or loss of tension.
INTERMEDIATE PIPE REMOVAL
1. Loosen the muffler spring suspension bracket bolts.
2. Remove the springs from the intermediate pipe and muffler inlet. See following WARNING and NOTE.
ý
WARNING
• Always wear eye protection when springs are removed or installed.
NOTE: Shift the end of the muffler inlet and intermediate pipe from side to side to relax and disconnect the
springs.
3. Remove the springs from the intermediate pipe and manifold pipe and remove the pipe.
INTERMEDIATE PIPE INSTALLATION
1. Secure the intermediate pipe to the manifold pipe with new springs. See following WARNING and
NOTE.
ý
WARNING
• Always wear eye protection when springs are removed or installed.
NOTE: Shift the end of the muffler inlet and intermediate pipe from side to side to relax and connect the
springs.
Figure 13a-4 Muffler Bracket and Inlet Pipe