Club Car IntelliTach XRT 1550, Maintenance And Service Manual

Page: 501 / 564

HYDRAULIC ATTACHMENT SYSTEM Attachment Interface
2007 Carryall 295/295 SE & XRT 1550/1550 SE Gasoline, Diesel and IntelliTach M & S Manual Page 16-3
16
Mount
NOTE: The following picture may not show your exact attachment but mounting frame inspections are the
same.
Inspect the pin mounts (1), mounting flange (2) and all welds for wear, damage and cracks (Figure 16-4,
Page 16-3) . Replace or repair parts as necessary.
REMOVING AND INSTALLING THE ATTACHMENT ARM MECHANISM
When the attachment arm mechanism is not being used, it can be removed from the vehicle.
NOTE: Remove the bucket or the attachment before attempting to remove the attachment arm mecha-
nism from the vehicle.
Attachment Arm Removal
NOTE: When removing the cylinders from the attachment arm or the interface, the cylinders may need to
be retracted slightly. Do not have hands in the area of the cylinders when extending or retracting
the cylinders.
Figure 16-3 Hand Lever Linkages and Pins Figure 16-4 Inspect Mount
Figure 16-5 Lower Arm and Tilt Interface Forward Figure 16-6 Remove Interface Cylinder Retaining Pin
1
2