HONDA GASOLINE ENGINE, MUFFLER, FUEL SYSTEM, AND CLUTCHES
Clutches
2007 Carryall 295/295 SE & XRT 1550/1550 SE Gasoline, Diesel and IntelliTach M & S Manual
Page 13b-29
13B
2. Disconnect the battery cables as instructed.
See WARNING “To avoid unintentionally starting...” in
General Warning, Section 1, Page 1-1.
3. Remove the hose end from the air filter canister outlet port.
4. Remove the hose end from the carburetor inlet port and remove the hose.
AIR FILTER OUTLET HOSE INSTALLATION
1. Connect the air filter outlet hose to the air filter outlet port and secure it with a clamp.
2. Connect the air filter outlet hose to the carburetor inlet port and secure it with a clamp.
3. Connect the battery cables, positive (+) cable first, and tighten the hardware to 144 in-lb (16 N·m). Coat
terminals with Battery Terminal Protector Spray (CCI P/N 1014305).
CLUTCHES
To assemble and disassemble the drive and driven clutches properly, the following tools should be used:
•
Drive clutch service tools:
-
Spider removal tool CCI P/N 102607501
-
Fixed sheave tool CCI P/N 102601501
Figure 13b-30 Clutch Service Tools
SPRING COMPRESSION
NUT (CCI P/N 102606101)
SPRING COMPRESSION
COLLAR (CCI P/N 102605201)
SPRING COMPRESSION
BASE (CCI P/N 102603501)
SPIDER REMOVAL
TOOL (CCI P/N 102607501)
FIXED SHEAVE TOOL
(CCI P/N 102601501)
Summary of Contents for IntelliTach XRT 1550
