DIESEL ENGINE, MUFFLER, FUEL SYSTEM, AND CLUTCHES
Air Intake System
2007 Carryall 295/295 SE & XRT 1550/1550 SE Gasoline, Diesel and IntelliTach M & S Manual
Page 13c-25
13C
2. Disconnect the battery cables as instructed.
See WARNING “To avoid unintentionally starting...” in
General Warning, Section 1, Page 1-1.
3. Disconnect the air intake hose from under the filter canister.
4. Disconnect the air intake hose from the frame under the vehicle body.
5. Slide the air intake hose through the frame support bracket and remove the hose from the vehicle
(Figure 13c-26, Page 13c-25)
.
AIR FILTER INTAKE HOSE INSTALLATION
1. Slide the air intake hose through the frame support bracket
(Figure 13c-26, Page 13c-25)
.
2. Secure the air intake hose to the air port under the vehicle body
(Figure 13c-27, Page 13c-26)
.
3. Secure the air intake hose under filter canister (inlet) port
(Figure 13c-28, Page 13c-26)
.
NOTE:
Ensure the air intake hose is positioned against the port surfaces and the clamps are positioned
between the port bead and port surface.
Figure 13c-26 Air Intake Support Bracket
Summary of Contents for IntelliTach XRT 1550
