Club Car IntelliTach XRT 1550, Maintenance And Service Manual

Page: 418 / 564

HONDA GASOLINE ENGINE, MUFFLER, FUEL SYSTEM, AND CLUTCHES Choke and Air Intake System
Page 13b-28 2007 Carryall 295/295 SE & XRT 1550/1550 SE Gasoline, Diesel and IntelliTach M & S Manual
13B
AIR FILTER INTAKE HOSE INSTALLATION
1. Slide the air intake hose through the frame support bracket (Figure 13b-27, Page 13b-28) .
2. Secure the air intake hose to the air port under the vehicle body (Figure 13b-28, Page 13b-28) .
3. Secure the air intake hose under the filter canister (inlet) port (Figure 13b-29, Page 13b-28) . See fol-
lowing NOTE.
NOTE: Ensure the hose is positioned against the port surfaces and the clamps are positioned between the
port bead and port surface.
4. Connect the battery cables, positive (+) cable first, and tighten the hardware to 144 in-lb (16 N·m). Coat
terminals with Battery Terminal Protector Spray (CCI P/N 1014305).
AIR FILTER OUTLET HOSE REMOVAL
1. Turn the key switch OFF and remove the key. Set the park brake. Place the Forward/Reverse handle in
NEUTRAL.
Figure 13b-27 Air Intake Support Bracket
Figure 13b-28 Air Port on Frame Figure 13b-29 Air Filter Inlet Hose