Avaya IP Office Phone Manager, Installation Manual, Page: 65 / 411

IP Office Installation Page 64
15-601042 Issue 20b (16 July 2009) IP Office
3. Planning
3.1 Space Requirements
The Small Office Edition is designed to be free-standing or wall mounted. The base includes integral screw-head slots for
wall mounting and an additional bracket is supplied with the module for a locking screw.
All the other IP Office control units and modules are designed to be installed either in a free-standing stack or into a 19"
rack system. Rack installation requires a
rack mounting kit for each control unit and expansion module.
•
Cable Clearance
Clearance must be provided at the front and rear of all modules for cable access and feature key dongle connection.
•
On IP400 and Small Office Edition systems, allow a minimum clearance of 75mm (3 inches).
•
On IP500 systems allow a minimum clearance of 90mm (3.5 inches).
•
Additional Clearance
Care should be taken to ensure that the positioning of the modules does not interrupt air flow and other factors that
may affect
environmental requirements . This is especially important on IP500 control units which have ventilation
slots at the side.
•
Cable Access
Power cords must not be attached to the building surface or run through walls, ceilings, floors and similar openings.
Installation measures must be taken to prevent physical damage to the power supply cord, including proper routing of
the power supply cord and provision of a socket outlet near the fixed equipment or positioning of the equipment near a
socket outlet.
Small Office Edition Control Unit
The Small Office Edition control unit can be used free-standing or wall mounted.