Avaya IP Office Phone Manager, Installation Manual, Page: 130 / 411

IP Office Installation Page 129
15-601042 Issue 20b (16 July 2009) IP Office
IP400 Basic Installation: Adding Expansion Modules
6.12 Adding a WAN3 Module
WAN3 expansion modules connect to the IP Office control unit
using a LAN cable. It is preferred that the cable is connected
directly to the IP Office control unit rather than via any other
equipment. A green 1 meter (3'3'') LAN interconnect cable is
supplied with the module for this purpose though a replacement
cross-over cable is required if connecting to an IP412 control
unit.
The WAN3 module requires its own IP address on the same
subnet as the IP Office control unit. A WAN3 module obtains
that address using DHCP so a DHCP server is required for
installation.
This module is supplied with a LAN interconnect cable and a power supply unit . An appropriate locale specific power cord
for the power supply unit, and cables for the WAN ports on the rear of the module must be ordered separately.
Installation Requirements
•
o Installation space either on or under the existing IP Office control unit.
•
o Switched power outlet socket.
•
o
System password.
•
o Free LAN port on the front of the control unit.
•
o
Grounding Requirements
•
o
Functional Ground - Connection of a functional ground is recommend for all modules.
Tools Required
•
o Manager PC.
•
o
DHCP server (preferably the IP Office itself).
•
o
Tools for rack mounting (optional).
Parts and Equipment Required
•
o WAN3 10/100 Module
Each module is supplied with a suitable external power supply unit and a RJ45-RJ45 LAN interconnect cable.
•
o For the IP412 control unit an RJ45-RJ45 LAN crossover cable is required.
•
o WAN Cables
A V.24, V.35 or X.21 WAN cable is required for connection to each WAN port. The cable used determines the
signalling provided by that port.
•
o
Power cord for the power supply unit .
•
o Rack mounting kit (optional) .
•
o
Cable labeling tags.