Avaya IP Office Phone Manager, Installation Manual, Page: 180 / 411

IP Office Installation Page 179
15-601042 Issue 20b (16 July 2009) IP Office
Additional Processes: License Keys
9.6.3 Serial Port Feature Key Installation
1. Plug the serial port Feature Key dongle into the serial port on the IP Office control unit (IP Office Small Office
Edition, IP406 V2 and IP412 control units).
2. Start Manager and receive the IP Office system's configuration.
3. Select System .
4. On the System tab, the License Server IP Address field is used to set the location of the feature key. For a
serial port license key, set the License Server IP Address to be blank.
5. Click OK .
6. Select License .
7. To add a license, click and select License . Enter the new license click OK .
8. The Status of the new license should show Unknown and name the license as expected. If its Status is Unknown
and name Invalid , the most likely cause is incorrect entry of the license key characters.
9. Click on to send the configuration back to the IP Office. The menu that appears will indicate whether a reboot
is required.
10.Use Manager to receive the configuration again and check that the status of the license. It should now be Valid .