manualshive.com logo in svg

Avaya IP Office Phone Manager, Installation Manual, Page: 127 / 411

Share
Download
Avaya IP Office Phone Manager Installation Manual Download Page 127

IP Office Installation

Page 126

15-601042 Issue 20b (16 July 2009)

IP Office

 

Procedure: Rack Mounting

1. Using the small screws (2), fix the main brackets (6) to the module.

2. Using the nut (5), bolt (3) and washer (4) provided, loosely fit the module into the rack system in its intended

position.

3. If required, add the cable guide brackets (7) before finally tightening the nuts and bolts.

4. If required, connect the module ground points to the rack ground point. This should be done using 14AWG solid

wire with either a green sleeve (functional ground) or green and yellow sleeve (protective ground).

5. Continue installation and setup as normal.

 

Summary of Contents for IP Office Phone Manager




























































































































































































































































































































































































































Reviews:

No comments