Avaya IP Office Phone Manager Installation Manual Download Page 24 | Manualshive

Page: 24 / 411

Avaya IP Office Phone Manager Installation Manual Download Page 24

IP Office Installation

Page 23

15-601042 Issue 20b (16 July 2009)

IP Office

System Overview: IP500 Trunk Cards

2.7 IP400 Trunk Cards

A range of IP400 trunk cards are available for different trunk types. Each IP400 trunk card is supplied with stand off
pillars and a replacement blanking plate for use with IP400 control units.

•

Small Office Edition Control Units

All versions of the Small Office Edition control include either two or four integral analog trunk ports on the front of the
unit. In addition a single IP400 trunk card can be fitted to the rear of the unit.

•

IP400 Control Units

The IP406 V2 and IP412 can be fitted with up to 2 IP400 trunk cards. Except where otherwise indicated, it is
recommended that Slot B is used first.

•

IP500 Control Unit

The IP500 control unit can accept up to two IP400 trunk cards by mounting each card on an IP500 Legacy Card Carrier
base card.

«
...
22
23
24
25
26
...
»

Summary of Contents for IP Office Phone Manager




























































































































































































































































































































































































































Reviews:

No comments