Avaya IP Office Phone Manager, Installation Manual, Page: 206 / 411

IP Office Installation Page 205
15-601042 Issue 20b (16 July 2009) IP Office
System Components: Control Units
Ports Description
AUDIO 3.5mm Stereo jack socket. Used for external music on hold source input.
C/F TII Type 2 Compact Flash socket. Used for optional embedded voicemail card.
DC I/P DC power input port. Used for connection of the power lead from an Avaya un-earthed 45W external
power supply unit supplied with the control unit.
DS RJ45 socket. Digital Station port. Used for connection of IP Office supported DS phones . Not suitable
for out-of-building connections.
DTE 9-Way D-Type socket. Used for system maintenance. Suitable for direct connection of IP Office
Serial Port Feature Key dongle.
EXPANSION RJ45 socket. Used for direct connection to external expansion modules using the Expansion
Interconnect cable supplied with the expansion module.
EXT O/P 3.5mm Stereo jack socket. Used for switching external relay systems such as door entry controls.
The port contains two independent switches controlled by the IP Office.
LAN These ports form an unmanaged layer 2 Ethernet switch. The ports are full-duplex 10/100Mbps
auto-sensing, auto-MDI/MDIX.
PHONE Used for connection of analog phones. Not suitable for out-of-building connections. Four-wire analog
phones should be connected via a master socket containing ringing capacitors.
SLOT A Used for trunk cards of all types except WAN port trunk card. Normally Slot B should be used first.
Dual PRI trunk cards supported in Slot A only. Trunks cards are supplied with replacement external
blanking plates suitable for the trunk card port connections.
SLOT B
WAN 37-Way D-Type socket. Used for the connection of V.24, V.35 or X.21 WAN service.
Used for connection of a function or protective ground . Use of a ground for all systems is
recommended and for some locales may be a regulatory requirement.
All control units are available in either North America or Rest of World variants. The choice controls various default
settings of the unit. For E911 support a North American variant control unit must be used. The companding can be
changed once a unit is installed.
Item Variant Country SAP Code
IP406 V2 Office DS. A-Law Rest of World 700343536
U-Law North America 700359946
IEC60320 C13 Power Cord CEE7/7 Europe 700289762
BS1363 United Kingdom 700289747
NEMA5-15P America 700289770
China China 700261977
IP400 Rack Mounting Kit All 700210800
Control units are supplied with an external power supply unit but not a locale specific power cord.