Home
/
Avaya
/
IP Office Phone Manager
/
Installation Manual

Avaya IP Office Phone Manager, Installation Manual, Page: 106 / 411

Share

Page: 106 / 411

Avaya IP Office Phone Manager Installation Manual Download Page 106

IP Office Installation

Page 105

15-601042 Issue 20b (16 July 2009)

IP Office

IP500 Basic Installation: Grounding

Procedure

The ground point on IP Office control units and expansion modules are marked with a

or

symbol.

Ground

connections to these points should use a 14 AWG solid wire with either a green sleeve for a functional ground or green
and yellow sleeve for a protective ground.

IP500 Control Unit

On IP500 control units the ground point is located above the RS232 DTE port.

External Expansion Modules

On expansion modules, the ground point is a 4mm screw located towards the right on the rear of the module.

•

On some older modules, the dedicated ground point screw is not present. In those cases, the top-center cover fixing
screw (3mm) can be used as an alternative ground connection point. A toothed washer should be added to ensure
good contact.

«
...
104
105
106
107
108
...
»

Summary of Contents for IP Office Phone Manager




























































































































































































































































































































































































































Reviews:

No comments