Avaya IP Office Phone Manager Installation Manual Download Page 160

Page: 160 / 411

IP Office Installation

Page 159

15-601042 Issue 20b (16 July 2009)

IP Office

External Trunk Configuration: Clock Quality

Objective

- Set a chosen digital trunk as the network clock source and set all other digital trunks as fallback or

unsuitable.

Procedure

1. Within the IP Office configuration, select

Line.

2. For each digital line, select the line and on the Line tab select whether that trunk should provide the clock source

for the network or whether the trunk is unsuitable. For E1R2 trunks the Clock Quality setting is on the

Advanced

tab.

3. Ensure that only one trunk is set to Network. This should preferably be a direct digital trunk to the central office

exchange.

4. One other trunk can be set a Fallback should the selected Network trunk connection be lost. If possible this should

be a trunk from a different provider since that reduces the chances of both sources failing at the same time.

5. Ensure that all other digital trunks are set as Unsuitable.

Summary of Contents for IP Office Phone Manager




























































































































































































































































































































































































































Search results

Summary of Contents for IP Office Phone Manager

Reviews:

Avaya IP Office Phone Manager, Installation Manual, Page: 160 / 411

Search results

Summary of Contents for IP Office Phone Manager

Reviews: