Avaya IP Office Phone Manager, Installation Manual, Page: 145 / 411

IP Office Installation Page 144
15-601042 Issue 20b (16 July 2009) IP Office
Procedure: Desk Mounting
1. At the IP Office end, check that each DS port is connected to the appropriate port in the structured cabling system
patch panel.
2. Start Manager. During installation each 2400/5400 series phone requests software from Manager and then loads
that software before becoming operational.
3. Unpack the phone.
4. The phones are supplied with the plastic mounting wedge in the wall mounting position as this allows a smaller box
size.
5. Slide off the plastic wedge and reattach it in the opposite position so that the phone is now angled for use on a
desk.
6. Connect the handset cord to the handset.
7. Connect the handset cord to the port labeled HAC . This is normally located on the left-hand side of the
phone.
8. Connect the line cord to the port marked with a symbol.
9. Connect the line cord to the desk socket.
10.The phone should display Upgrading firmware, please wait and then FIRMWARE UPDATE IN PROGRESS. Once this
has completed the should briefly display New Calls: 0 and then the current users name and extension number.
11.For XX10 and XX20 models, assemble the adjustable desk stand. Attach the stand to the base of the phone.