Avaya IP Office Phone Manager Installation Manual Download Page 170

Page: 170 / 411

IP Office Installation

Page 169

15-601042 Issue 20b (16 July 2009)

IP Office

Additional Processes: Creating a WAN Link

9.3 IP500 Reset Button

The IP500 control unit includes a Reset button not found on other IP Office control unit.

Pressing the button while the control unit is starting up will pause the start up until the button is released.

The effect of pressing the button during normal operation will depend on how long the button is pressed and is indicated
by the CPU LED.

Press Duration
(seconds)

CPU LED

Action

Summary

0 to 5.

Off

None

None.

5 to 10.

Orange

Reboot When Free

Reboot when free with new incoming/outgoing call
barring. A reboot using the reset button is recorded in
the Audit Trail.

10 to 30.

Flashing orange

Erase Configuration/
Immediate Reboot

Erase the configuration, alarm log and audit trail.
Immediate reboot without waiting for active calls to end.
See

Erasing the configuration

for full details.

30 to 40.

Red

Erase All.

Erase configuration, alarm log and core software. See

Erasing the Operational Software

for full details.

Over 40.

Flashing green

None

None.

Summary of Contents for IP Office Phone Manager




























































































































































































































































































































































































































Search results

Summary of Contents for IP Office Phone Manager

Reviews:

Avaya IP Office Phone Manager, Installation Manual, Page: 170 / 411

Search results

Summary of Contents for IP Office Phone Manager

Reviews: