Avaya IP Office Phone Manager, Installation Manual, Page: 257 / 411

IP Office Installation Page 256
15-601042 Issue 20b (16 July 2009) IP Office
So8 Module Connections
Ports Description
BRI RJ45 socket. Used for connection of ISDN terminal devices.
Note: These ports appear a lines within the IP Office configuration. However they cannot be used for
connection to external BRI lines.
DC I/P DC power input port. Used for connection of the power lead from an Avaya 60W external power supply
unit supplied with the expansion module. A locale specific
IEC60320 C13 power cord for the external
PSU is required but is not supplied with the module.
DTE 25-Way D-Type socket. For Avaya use only.
EXPANSION RJ45 Socket. Used for direct connection to an Expansion port on an IP Office control unit using the
Expansion Interconnect cable supplied with the module.
Function ground point. Used for connection of a protective or functional ground if required. On older
modules where this screw is not present, the top-center cover screw should be used instead.
All expansion modules are supplied with a base software level and should be upgraded to match the core software of the
control unit in the IP Office system. Expansion modules include an external power supply unit (PSU) and an appropriate
interconnect cable. They do not include a locale specific power cord for the external PSU or any phone extension cables.
Item Variant Country SAP Code
IP400 So8 All 700185077
IEC60320 C13 Power Cord CEE7/7 Europe 700289762
BS1363 United Kingdom 700289747
NEMA5-15P America 700289770
China China 700261977
IP400 Rack Mounting Kit All 700210800