Avaya IP Office Phone Manager, Installation Manual, Page: 128 / 411

IP Office Installation Page 127
15-601042 Issue 20b (16 July 2009) IP Office
IP400 Basic Installation: Rack Mounting
6.11 Adding Expansion Modules
External expansion modules, except the WAN3, connect to the IP Office control unit
using a blue 1 meter (3'3'') expansion interconnect cable.
•
Note
Expansion modules are only detected by the IP Office control unit, if the
Expansion modules are powered up and running before the control unit is
started. The control unit power on process includes a delay to ensure that if
all modules in a system are started at the same time, the expansion modules
should complete their power up before the control unit.
Each module is supplied with an expansion connect cable and a power supply unit . An appropriate locale specific power
cord for the power supply unit, and cables for the ports on the front of the module must be ordered separately.
Warnings
•
No cable other than an Expansion Interconnect cable should be used. Use of any alternate cable will lead to
system failure.
Installation Requirements
•
o Installation space either on or under the existing IP Office control unit.
•
o Switched power outlet socket.
•
o
Free EXPANSION port on the rear of the control unit.
•
o Grounding Requirements
•
o
Functional Grounding
Connection of a functional ground is:
•
o Recommend for all modules.
•
o
Connection of a functional ground is mandatory for Analog Trunk module.
•
o Protective Grounding
Connections of a protective ground via surge protection equipment is:
•
o Mandatory for Analog trunk modules in the Republic of South Africa.
•
o Mandatory for Digital Station and Phone modules connected to out of building extensions.
•
o
Mandatory for Digital Station V2 and Phone V2 modules.
Tools Required
•
o Manager PC.
•
o Tools for rack mounting (optional).