manualshive.com logo in svg

Avaya IP Office Phone Manager, Installation Manual, Page: 227 / 411

Share
Download
Avaya IP Office Phone Manager Installation Manual Download Page 227

IP Office Installation

Page 226

15-601042 Issue 20b (16 July 2009)

IP Office

10.4.1 Analog Trunk 16

The IP500 Analog Trunk module can be used to add 16 additional analog trunks to an IP Office system. The module
supports both loop-start and, with suitable grounding, ground-start trunks. This module is currently only supported in the
US locale. 

•

IMPORTANT

 

In all IP Office installations, any module being used for analog trunk connections must be connected to a 

functional

earth

.

•

 WARNING

 

Within areas of high lightning risk, any module using analog trunk connections must be connected to a 

protective

ground

 and to 

surge protection equipment

 (an Avaya 146G Surge Protector).

Feature

Details

Supported on

All IP Office control units except Small Office Edition. 

Locales

Specific variants are provided for different IP Office locales, see below.

Software Level

IP Office core software level 1.0 minimum. Bin file = naatm16.bin.

Included

Power supply unit (see below) and Expansion Interconnect cable.

Power Supply

The module is supplied with a 2-pin, 40W external power supply unit. The PSU has an integral
power cord for connection to the module's DC I/P socket. A locale specific 

IEC60320 C7 power

cord

 for the external PSU is required but is not supplied with the module.

Mounting

The module is designed as a free-standing module that can be stacked on or under other IP Office
modules. The module can be rack mounted in a 19" rack system using the optional IP500 Rack
Mounting Kit.

Dimensions

Width: 445mm/17.5". Depth: 245mm/9.7". Height: 71mm/2.8"/2U.

Weight

Unboxed: 2.9Kg/6.6lbs. Boxed: 4.2Kg/9.4lbs.

Summary of Contents for IP Office Phone Manager




























































































































































































































































































































































































































Reviews:

No comments