Avaya IP Office Phone Manager, Installation Manual, Page: 255 / 411

IP Office Installation Page 254
15-601042 Issue 20b (16 July 2009) IP Office
Phone V1 Module Connections
Ports Description
DC I/P DC power input port. Used for connection of the power lead from an Avaya 40W external power
supply unit supplied with the expansion module. A locale specific
IEC60320 C7 power cord for the
external PSU is required but is not supplied with the module.
DTE 25-Way D-Type socket. For Avaya use only.
EXPANSION RJ45 Socket. Used for direct connection to an Expansion port on an IP Office control unit using the
Expansion Interconnect cable supplied with the module.
POT RJ45 socket. Used for connection of analog phones.
If connected to an
out-of-building extension , the connection must be made via additional IP Office
Barrier Box devices in addition to the buildings primary protection. The module must also be
connected to a protective ground.
Function ground point. Used for connection of a protective or functional ground if required. On older
modules where this screw is not present, the top-center cover screw should be used instead.
Must be connected if any
out-of-building extensions are connected to this module.
All expansion modules are supplied with a base software level and should be upgraded to match the core software of the
control unit in the IP Office system.
Item Variant Country SAP Code
IP400 Phone V1 8 Ports All 700184773
16 Ports 700184781
30 Ports 700184799
IEC60320 C7 Power Cord CEE7/16 Europe 700213382
BS1363 United Kingdom 700213374
NEMA1-15 America 700213390
Korea Korea 700254519
China China 700314172
IP400 Rack Mounting Kit All 700210800
Expansion modules include an external power supply unit (PSU) and an appropriate interconnect cable. They do not
include a locale specific power cord for the external PSU or any phone extension cables.