Home
/
Avaya
/
IP Office Phone Manager
/
Installation Manual

Avaya IP Office Phone Manager, Installation Manual, Page: 102 / 411

Share

Page: 102 / 411

Avaya IP Office Phone Manager Installation Manual Download Page 102

IP Office Installation

Page 101

15-601042 Issue 20b (16 July 2009)

IP Office

IP500 Basic Installation: Rack Mounting

5.18 Wall Mounting

The IP500 control unit can be wall mounted. This requires an IP500 Wall
Mounting Kit (SAP 700430150) plus additional 4.5mm fixtures and
fittings suitable for the wall type. The wall mounting kit includes two
brackets, one top and one bottom.

Environmental Requirements

In addition to the existing

environmental requirements

for an IP Office

system, the following additional requirements apply when wall mounting
a unit:

•

The wall surface must be vertical, flat and vibration free.

•

A minimum clearance of 500mm (19.7 inches) is required on

all sides.

•

The unit must be orientated as shown when mounted. That is

with the base card slots facing right when viewed from in front of
the unit.

•

The brackets must be used as shown, with the deeper tray-

like bracket used at the bottom of the wall mounted control unit.

•

Only the screws (M3 x 6mm) provided with the mounting kit

should used to attach the brackets to the control unit.

«
...
100
101
102
103
104
...
»

Summary of Contents for IP Office Phone Manager




























































































































































































































































































































































































































Reviews:

No comments