Avaya IP Office Phone Manager, Installation Manual, Page: 217 / 411

IP Office Installation Page 216
15-601042 Issue 20b (16 July 2009) IP Office
10.2.1 Analog Phone
This card is used to add analog phone extension ports to the IP500 control unit. It is available in two variants, providing
either 2 or 8 analog extension ports.
The cards have 8 RJ45 extension ports (1 to 8) for use with analog phone devices. A further 4 RJ45 ports (9 to 12) are
provided for trunk connections when an IP500 trunk daughter card is fitted to this card.
•
Supports
Provides either 8 or 2 analog phone ports depending on card variant:
•
Supports ICLID modes DTMFA, DTMFC, DTMFD, FSK and
UK20.
•
REN 2 (1 for external bell device).
•
Off-Hook current: 25mA
•
Ring Voltage: 40V.
•
The Analog Phone 8 provides a power fail port when fitted
with an IP500 Analog Trunk daughter card. During power
failure extension port 8 is connected to the analog trunk
port 12.
•
Intended for connection to two-wire analog phones, the
ports do not include a ringing capacitor. For connection to 4-
wire analog phones, connection should be via a master
socket with ringing capacitors.
•
Maximum per IP500 Control Unit: 4.
•
IP500 Daughter Card Support: 1.
Analog Extension Ports (1-8)
•
LED1 only is used.
•
LED1 is used for card status:
•
Red On - Error
•
Red Flashing - Initializing.
•
Red Flash every 5 seconds - Okay.
Daughter Card Ports (9-12)
LED use depends daughter card type:
•
IP500 Analog Trunk Card.
•
IP500 BRI Trunk Card.
•
IP500 PRI Trunk Card.
•
LED 9 is also used for daughter card
status. Flash every 5 seconds =
Okay.
Name Description SAP Code
IPO 500 Extn Card Phone 2 IP Office 500 Extension Card Phone 2 700431778
IPO 500 Extn Card Phone 8 IP Office 500 Extension Card Phone 8 700417231