Avaya IP Office Phone Manager Installation Manual Download Page 273

Page: 273 / 411

IP Office Installation

Page 272

15-601042 Issue 20b (16 July 2009)

IP Office

10.8.10 3641

The Avaya 3641 IP Wireless Telephone is a WiFi telephone that runs using H.323.

The 3641 supports the following features:

•

Lightweight innovative design .

•

Simple to use.

•

802.11a, 802.11b and 802.11g standard-compatible.

•

Transmission type Direct Sequence Spread Spectrum (DSSS).

•

FCC certification Part 15.247.

•

Management of telephones via DHCP and TFTP.

•

Voice encoding G711.

•

Wired Equivalent Privacy (WEP) - 40bit and 128 bit. WPA-PSK, WPA2-PSK.

•

5x16 character alphanumeric, plus status indicators.

•

4 hours talk time and 80 hours standby. Extendable with optional battery packs to 8 hours talk time and 160 hours
standby.

Summary of Contents for IP Office Phone Manager




























































































































































































































































































































































































































Search results

Summary of Contents for IP Office Phone Manager

Reviews:

Avaya IP Office Phone Manager, Installation Manual, Page: 273 / 411

Search results

Summary of Contents for IP Office Phone Manager

Reviews: