manualshive.com logo in svg

Avaya IP Office Phone Manager, Installation Manual, Page: 233 / 411

Share
Download
Avaya IP Office Phone Manager Installation Manual Download Page 233

IP Office Installation

Page 232

15-601042 Issue 20b (16 July 2009)

IP Office

10.4.4 Phone

IPO 500 Phone modules can be used to add additional PHONE ports to an IP Office system. Note that this requires the IP
Office 500 control unit to be configured with an IP500 Upgrade Standard to Professional license.

The module is available in 16 and 30 port variants, referred to as the IPO 500 Phone 16 and IPO 500 Phone 30
respectively.

Feature

Details

Supported on

All IP Office control units except Small Office Edition. 

Locales

Supported in all IP Office locales.

Software Level

IP Office core software level 2.1(36) minimum. Bin file = dvpots.bin.

Included

Power supply unit (see below) and Expansion Interconnect cable.

Power Supply

The module is supplied with a Earthed 3-Pin, 60W external power supply unit. The PSU has an
integral power cord for connection to the module's DC I/P socket. A locale specific 

IEC60320 C13

power cord

 for the external PSU is required but is not supplied with the module.

Mounting

The module is designed as a free-standing module that can be stacked on or under other IP Office
modules. The module can be rack mounted in a 19" rack system using the optional IP500 Rack
Mounting Kit.

Dimensions

Width: 445mm/17.5". Depth: 245mm/9.7". Height: 71mm/2.8".

Weight

Unboxed: 3.1Kg/6.94lbs. Boxed: 4.4Kg/9.7lbs. (Based on Phone 30 V2)

 

Summary of Contents for IP Office Phone Manager




























































































































































































































































































































































































































Reviews:

No comments