ABB RELION RET670, Applications Manual

Page: 949 / 1016

Function block with pre-defined functions in control direction, I103CMD. This block
includes the FUNCTION TYPE parameter, and the INFORMATION NUMBER
parameter is defined for each output signal.
• Function commands in control direction
Function block with user defined functions in control direction, I103UserCMD. These
function blocks include the FUNCTION TYPE parameter for each block in the private
range, and the INFORMATION NUMBER parameter for each output signal.
Status
M17109-74 v6
For more information on the function blocks below, refer to the
Communication protocol manual, IEC 60870-5-103 .
The events created in the IED available for the IEC 60870-5-103 protocol are based on
the:
• IED status indication in monitor direction
Function block with defined IED functions in monitor direction, I103IED. This block
use PARAMETER as FUNCTION TYPE, and INFORMATION NUMBER parameter
is defined for each input signal.
• Function status indication in monitor direction, user-defined
Function blocks with user defined input signals in monitor direction, I103UserDef.
These function blocks include the FUNCTION TYPE parameter for each block in the
private range, and the INFORMATION NUMBER parameter for each input signal.
• Supervision indications in monitor direction
Function block with defined functions for supervision indications in monitor direction,
I103Superv. This block includes the FUNCTION TYPE parameter, and the
INFORMATION NUMBER parameter is defined for each output signal.
• Ground fault indications in monitor direction
Function block with defined functions for ground fault indications in monitor direction,
I103EF. This block includes the FUNCTION TYPE parameter, and the
INFORMATION NUMBER parameter is defined for each output signal.
• Fault indications in monitor direction
1MRK 504 163-UUS A
Section 21
Station communication
Transformer protection RET670 2.2 ANSI 943
Application manual