Eaton Electrical Inc. strongly recommends that these
products be installed by a qualified electrician.
IMPORTANT - INSTALL EQUIPMENT IN CONFORMANCE
WITH CODES
This product must be installedinaccordance withthe National
Electric Code (NEC) or the CanadianElectrical Code (CEC0 and
any applicable local codes. Before installingequipment, check
withyour local electrical inspector for requirements andinfor-
mation. If youhave questions or needassistance, contact a
qualifiedelectrician.
Installation Instructions for the Powerslide RV Pedestal #70-8760
Turn off or disconnect the power supplying this
equipment before beginning work.
This may require that youcontact your electric utility to
disconnect power toanexistingload-center. The line
side of the mainbreaker is energizedunless power is
disconnectedupstream. EatonElectrical, Inc. will not
assume responsibility for property damage or personal
injury resultingfrommisuse of the informationinthis
publication.
Hazardous voltage. Can cause severe in-
jury or death.
Turnoff mainpower before openingpanel.
Rev: 11/20/2017
