Yamaha WR250F(N), Руководство по эксплуатации для владельца

Страница: 556 / 686

5 - 45
CHAS
HANDLEBAR
7. Install:
●
Light switch 1
T
R
.
.
2 Nm (0.2 m · kg, 1.4 ft · lb)
8. Install:
●
Engine stop switch 1
●
Clutch lever holder 2
●
Bolt (clutch lever holder) 3
●
Decompression lever holder 4
●
Bolt (decompression lever holder) 5
●
Clamp 6
T
R .
.
4 Nm (0.4 m · kg, 2.9 ft · lb)
T
R
.
.
4 Nm (0.4 m · kg, 2.9 ft · lb)
NOTE:
●
The engine stop switch, clutch lever holder,
decompression lever holder and clamp
should be installed according to the dimen-
sions shown.
●
Pass the engine stop switch lead in the mid-
dle of the clutch holder.
9. Install:
●
Clutch cable 1
●
Decompression cable 2
NOTE:
Apply the lithium soap base grease on the
clutch cable end and decompression cable
end.
B
2
1
10. Adjust:
●
Clutch lever free play
Refer to “CLUTCH ADJUSTMENT”
section in the CHAPTER 3.
●
Decompression lever free play
Refer to “DECOMPRESSION LEVER
ADJUSTMENT” section in the CHAP-
TER 3.