Yamaha WR250F(N), Руководство по эксплуатации для владельца

Страница: 552 / 686

5 - 43
CHAS
HANDLEBAR
EC5B5000
ASSEMBLY AND INSTALLATION
Handlebar
1. Install:
●
Handlebar 1
●
Handlebar upper holder 2
●
Bolt (handlebar upper holder) 3
NOTE:
●
The handlebar upper holder should be
installed with the punched mark
a
forward.
●
First tighten the bolts on the front side of the
handlebar upper holder, and then tighten the
bolts on the rear side.
2. Install:
●
Left grip 1
Apply the adhesive to the handlebar 2 .
NOTE:
●
Before applying the adhesive, wipe off
grease or oil on the handlebar surface
a
with a lacquer thinner.
●
Install the left grip to the handlebar so that
the line
b
between the two arrow marks
faces straight upward.
T
R
.
.
28 Nm (2.8 m · kg, 20 ft · lb)
3. Install:
●
Right grip 1
●
Collar 2
Apply the adhesive on the tube guide
3 .
NOTE:
●
Before applying the adhesive, wipe off
grease or oil on the tube guide surface
a
with a lacquer thinner.
●
Install the grip to the tube guide so that the
grip match mark
b
and tube guide slot
c
form the angle as shown.
R
L
90˚
2
1
b
c