Yamaha WR250F(N), Руководство по эксплуатации для владельца

Страница: 464 / 686

4 - 99
ENG
TRANSMISSION, SHIFT CAM AND SHIFT FORK
2. Install:
●
2nd wheel gear (28T) 1
●
4th wheel gear (25T) 2
●
3rd wheel gear (28T) 3
●
5th wheel gear (22T) 4
●
1st wheel gear (31T) 5
●
O-ring 6
To drive axle 7 .
NOTE:
●
Apply the molybdenum disulfide oil on the
1st, 2nd and 3rd wheel gears inner circum-
ference and on the end surface.
●
Apply the molybdenum disulfide oil on the
4th and 5th wheel gears inner circumfer-
ence.
●
Apply the lithium soap base grease on the O-
ring.
3. Install:
●
Washer 1
●
Circlip 2
NOTE:
●
Be sure the circlip sharp-edged corner
a
is
positioned opposite side to the washer and
gear
b
.
●
Be sure the circlip end
c
is positioned at
axle spline groove
d
.
4. Install:
●
Collar 1
NOTE:
●
Apply the lithium soap base grease on the oil
seal lip.
●
When installing the collar into the crankcase,
pay careful attention to the crankcase oil seal
lip.