Chapter 6: Using the Web Interface
283
Note: When the total number of managed sensors and actuators reaches
the maximum, you CANNOT manage additional sensors or actuators
unless you remove or replace any managed ones. To remove a sensor
or actuator, see
Unmanaging Environmental Sensors or Actuators
(on page 293).
Special note for a Raritan humidity sensor:
As of release 3.1.0, a Raritan humidity sensor is able to provide two
measurements in the user interface - relative and absolute humidity
values.
A relative humidity value is measured in percentage (%).
An absolute humidity value is measured in grams per cubic meter
(g/m
3
).
Relative humidity sensors can be "automatically" managed but absolute
humidity sensors CANNOT. You must "manually" manage absolute
humidity sensors if absolute humidity measurements are required.
Relative and absolute humidity values of the same humidity sensor share
the same serial number and port position as illustrated below.
However, relative and absolute values of the same humidity sensor DO
NOT share the same ID number. The above diagram shows that the two
values have different ID numbers -- one is 4 and the other is 5.
Configuring Environmental Sensors or Actuators
You can change the default name to easily identify the managed sensor
or actuator, and describe its location with X, Y and Z coordinates.
To configure environmental sensors or actuators:
1. Click Peripheral Devices in the Explorer pane, and the Peripheral
Devices page opens in the right pane.
2. Select the sensor or actuator that you want to configure.
3. Click Setup. The "Setup of peripheral device <serial number>
(<sensor type>)" dialog appears, where <serial number> is its serial
number and <sensor type> is its type. For example, Setup of
peripheral device AEI7A00022 (Temperature).
Tip: You can also trigger the same setup dialog by selecting the
desired environmental sensor or actuator icon in the navigation tree
and then clicking Setup in the right pane.
Содержание PX3-4000 series
