Raritan PX3-4000 series, Руководство пользователя

Страница: 583 / 688

Appendix F: PX3 Phase I LCD Display
562
2. In the Overcurrent Protector mode, press the Up or Down button until
the desired overcurrent protector's number is displayed at the top of
the LCD display.
3. Check the reading and the text shown below the reading: CLOSE or
OPEN.

CLOSE: The selected circuit breaker is closed, or the selected
fuse is normal.

OPEN: The selected circuit breaker is open, or the selected fuse
has burned out. When this occurs, the term CbE is displayed in
place of the reading and a blinking word "ALARM" appears next
to the word OPEN.
IP Address
The IP address is available in the Device mode, which is indicated by the
alphabet 'd' shown at the top of the LCD display. Note that the LCD
display only shows the IPv4 address (if available).
Below illustrates the IP address information shown on the LCD display.
Section Example information
"d" means the LCD display has entered the Device
mode.
The LCD display is showing 192, which is one of the IP
address octets. It will cycle through four octets of the IP
address.
"i4" indicates that the IP address shown on the LCD
display is an IPv4 address.
The word "MASTER" indicates the PX is the master
device in a USB-cascading configuration. See
Cascading the PX via USB
(on page 28).
For a standalone PX, this word is NOT displayed.