Raritan PX3-4000 series, Руководство пользователя

Страница: 598 / 688

Appendix G: PX Models with Residual Current Monitoring
577
Disabling or Enabling Front Panel RCM Self-Test
You can enable or disable the function of performing the RCM self-test
by operating the front panel buttons. By default, this function is enabled.
To disable or enable the front panel RCM self-test:
1. Choose Device Settings > Security > Front Panel Permissions. The
Front Panel Permissions dialog appears.
2. Do either of the following:

To disable this function, deselect the "Perform RCM self-test"
checkbox.

To enable this function, select the "Perform RCM self-test"
checkbox.
3. Click OK.
Front Panel Operations for RCM
The front panel LCD display shows an alarm message when the RCM
enters the critical state. Besides, you can operate the LCD display to
check the RCM status.
Depending on the PX3 model you purchased, the front panel operation
instructions for RCM vary. PX3 phase II models use a dot-matrix LCD
display, and PX3 phase I models use a character LCD display.
LCD Message for RCM Critical State
In the RCM critical state, the PDU beeps and the LCD display indicates
the RCM critical state.
The RCM alarm messages displayed on PX3 phase I and phase II
models are different because of the LCD display difference. The RCM
alarm information continues to display as long as RCM is in a critical
state.
RCM alarm information on PX3 phase II models:
1. The LCD display shows two types of information for the inlet with the
RCM alarm:

RCM State: Critical.