Raritan PX3-4000 series, Руководство пользователя

Страница: 424 / 688

Chapter 8: Using the Command Line Interface
403
Setting IPv6 Static Routes
If the IPv6 network mode is set to static IP and your local network
contains two subnets, you can configure static routes to enable or
disable communications between the PX and devices in the other
subnet.
These commands are prefixed with
network ipv6 staticRoutes
.
Add a static route:
config:# network ipv6 staticRoutes add <dest-1> <hop>
Delete a static route
config:# network ipv6 staticRoutes delete <route_ID>
Modify an existing static route:
config:# network ipv6 staticRoutes modify <route_ID> <dest-2> <hop>
Variables:
 <dest-1> is the IP address and prefix length of the subnet where the
PX belongs. The format is
IP address/prefix length
.
 <hop> is the IP address of the next hop router.
 <route_ID> is the ID number of the route setting which you want to
delete or modify.
 <dest-2> is a modified route setting that will replace the original route
setting. Its format is
IP address/prefix length
. You can modify either
the IP address or the prefix length or both.
Setting LAN Interface Parameters
A LAN interface configuration command begins with
network interface
.