Raritan PX3-4000 series, Руководство пользователя

Страница: 62 / 688

Chapter 4: Connecting External Equipment (Optional)
41
a. Plug one end of the cable into the remaining RJ-45 port on the
prior DX package.
b. Plug the other end into either RJ-45 port on an additional DX
package.
Repeat the same steps to cascade more DX packages.
Exception: You CANNOT cascade DX-PD2C5 sensor packages. A
PX device supports only one DX-PD2C5.
3. Connect the first DX sensor package to the PX3 by plugging its
sensor cable connector into the RJ-45 SENSOR port of the PX3.
4. If needed, connect a DPX2 sensor package to the end of the DX
chain. See
Connecting a DPX2 Sensor Package to DX
(on page
41).
Warning: The PX3 does NOT support simultaneous connection of
both DX-PD2C5 and asset management sensor(s) so do NOT
connect both of them to the PX3 device.
Connecting a DPX2 Sensor Package to DX
You can connect only one DPX2 sensor package to the "end" of a DX
sensor chain. Simply plug the RJ-12 connector of the DPX2 sensor cable
into the RJ-45 port of the final DX in the chain.
The maximum number of DX sensor packages in the chain must be less
than 12 when a DPX2 sensor package is involved.
When connecting a DPX2 sensor package containing three
DPX2 sensors:
A maximum of nine (9) DX sensor packages can be cascaded
because 12-3=9.